High-permeability grain-oriented electrical steel, also described as high-permeability GOES or HGO, provides higher magnetic polarization and lower core loss than conventional grain-oriented grades. In some markets, this material class is also referred to as Hi-B-type CRGO.
High-permeability grain-oriented electrical steel, also described as high-permeability GOES or HGO, provides higher magnetic polarization and lower core loss than conventional grain-oriented grades. In some markets, this material class is also referred to as Hi-B-type CRGO.
It is used in transformer core designs where lower no-load loss, higher flux density or improved material efficiency is required. Final material selection should be based on the transformer design, target magnetic properties and downstream core-processing method.
| Parâmetro | Available Specification |
| Product Type | High-permeability grain-oriented electrical steel |
| Common Market Terms | High-permeability GOES, HGO, high-permeability CRGO, Hi-B-type material |
| Domain Refinement | Non-domain-refined |
| Nominal Thickness | 0.23 / 0.27 / 0.30 mm |
| Standard Coil Width | 800–1000 mm |
| Coil Inner Diameter | 510 mm |
| Typical Coil Weight | 3–5 metric tons per coil |
| Delivery Form | Full coil / slit coil / slit strip |
| Material Specification | GB/T 2521.2-2025 or another agreed material specification |
| Magnetic Properties | According to the confirmed grade, test method and inspection certificate |
Higher material performance does not by itself guarantee the no-load loss of a finished transformer. Core design, joint configuration, cutting quality, burr control, assembly and processing stresses also affect final core performance.
The required material grade and test conditions should therefore be confirmed against the transformer design before supply.
Please provide:
Send your required grade or target magnetic properties, thickness, width, quantity and destination for technical confirmation and quotation.
